Shenzhen Chinasky Laser Technology Co., Ltd. yɛ adwumayɛfo a wɔyɛ adwumaden ne wɔn a wɔde cantilever abasa laser welding nhyehyɛe wɔ China no mu biako. Yɛsrɛ sɛ nya awerɛhyem sɛ wobɛtɔ cantilever abasa laser welding nhyehyɛe a ɛkorɔn a mfe 2 warranty fi yɛn adwumayɛbea hɔ. Yɛgye nneɛma a wɔahyɛ da ayɛ nso.
nnianimu
Cantilever abasa laser welding nhyehyɛe no de cantilever nhyehyɛe a ɛyɛ mmerɛw ne fiber laser mfiridwuma a ɛkɔ anim di dwuma de nya welding pɛpɛɛpɛ a ɛyɛ adwuma. Ɛfata sɛ wɔde di dwuma wɔ nnwuma te sɛ dade afã horow a wɔyɛ, chassis a wɔyɛ, ne structural component assembly mu.
su
Mmienu-Ɔfa Cantilever Nhyehyɛe
Double-fã cantilever no ma 1500 mm trɛw gyina hɔ ne 1600 mm trɛw a ɛkɔ soro, kata adwumayɛ akɛse anaa nea ɛyɛ den so na ɛma wotumi yɛ welding a ɛyɛ mmerɛw.
High-Pɛpɛɛpɛ Welding
QCW (Quasi-Continuous Wave) mode a fiber laser no ma pulses ntiantiaa a ahoɔden a ɛkorɔn a ɛkorɔn, beae ketewaa bi a ɔhyew-ka, ne pɛ, a ɛyɛ den welds, na ɛma ɛfata ma welding pɛpɛɛpɛ afã horow.
Nhyehyɛe a Wɔde Hwɛ Nneɛma a Wɔaka abom
CCD ne microscopes hwɛ welding nhyehyɛe no so wɔ bere ankasa mu, na ɛtew adwumayɛ mu mfomso ne adwuma a wɔsan yɛ no dodow so.
Nneɛma a Wɔde Fa Nneɛma a Ɛyɛ Nsakrae
Esiane sɛ wɔde ntwahonan abien ahyɛ ase nti, ɛma ɛyɛ mmerɛw sɛ wobɛfa so na woatumi ayɛ nsakrae ma ɛne nneɛma a wɔyɛ no nhyehyɛe ahorow ahyia.
Nnwuma a Wɔde Di Dwuma
Nneɛma a wɔde yɛ dade a wɔde yɛ nneɛma:High-precision welding a ɛyɛ dade nkrataa ahorow, a ɛma welds a ɛyɛ pɛ na ɛyɛ den.
Precision chassis ne dade adan:Ɛfata ma welding adan a ɛlɛtrɔnik mfiri ne nnwinnade.
Kar afã horow a wɔde weld:Welding structural components ne functional dade afã horow, hwɛ hu sɛ ahoɔden ne pɛpɛɛpɛ.
Mfiridwuma mu mfiri a wɔboaboa ano:Wɔde di dwuma ma pɛpɛɛpɛ welding a mfiri nhyehyɛe afã horow ne nnwinnade frames.
FAQ
Asɛmmisa: Ɔkwan bɛn so na Cantilever Arm Laser Welding System hwɛ hu sɛ pɛpɛɛpɛ wɔ welding mu?
A: Afiri no ka high - precision laser mfiridwuma ne nsa afiri a ɛyɛ den na ɛyɛ articulated bom. Wobetumi adi laser hann no so pɛpɛɛpɛ wɔ ahoɔden, pulse trɛw, ne nea ɛkeka ho mu, na abasa no nkwaa ma kwan ma wɔde laser ti no si hɔ pɛpɛɛpɛ. Ɛsan nso de nhyehyɛe ahorow a wɔde hwɛ nneɛma a aniwa hu te sɛ microscopes anaa CCD mfoninitwa mfiri ba a ɛbɛboa ma wɔayɛ pɛpɛɛpɛ.
Asɛmmisa: Nneɛma bɛn na Cantilever Arm Laser Welding System betumi ayɛ weld yiye?
A: Wɔayɛ nhyehyɛe yi yiye ama adwinnade dade, carbides, dade a wɔagu, ne dade a ɛnyɛ den. Ɛsan nso boa nickel-based alloys ne copper-based materials bere a wode gas shielding ne parameter nhyehyɛe a ɛfata redi dwuma no.
Asɛmmisa: Ɔkwan bɛn so na laser fibea no yɛ nwini bere a wɔreyɛ adwuma no?
A: Fiber laser fibea no de nsu chiller a wɔaka abom di dwuma, hwɛ hu sɛ ɔhyew a ɛyɛ den na ɛyɛ adwuma daa bere a wɔde di dwuma bere tenten.
Asɛmmisa: So ntetee titiriw ho hia na ama wɔatumi de Cantilever Laser Welding System no adi dwuma?
A: Mpɛn pii no, dabi. Basic adwumayɛ betumi ayɛ mastered ntɛmntɛm esiane intuitive joystick ne rotary controls.
Q: So wobetumi de afiri no adi dwuma de asiesie wɔ-beae no wɔ adwumayɛbea no akyi?
A: Yiw. Mobile base a ɛwɔ locking mechanisms no ma kwan ma wɔde nhyehyɛe no kɔ injection molding mfiri, stamping press, anaa assembly lines so tẽẽ de siesie on-site, na ɛtew adwumayɛ mu ntwitwiridii so kɛse.
Tags a ɛyɛ hyew .: cantilever abasa laser welding nhyehyɛe, China cantilever abasa laser welding nhyehyɛe manufacturers, suppliers, adwumayɛbea
Mfiridwuma mu Nneɛma a Wɔde Yɛ Nneɛma
|
Nhwɛsoɔ |
HT-MDS-QCW150 na ɛwɔ hɔ |
HT-MDS-QCW300 na ɛwɔ hɔ |
HT-MDS1500 na ɛwɔ hɔ |
|
Laser a wɔde yɛ adwuma |
QCW (Quasi-Asorɔkye a ɛkɔ so) fiber laser |
Fiber laser a wɔde yɛ adwuma |
|
|
Size of light spot no kɛse |
0.2-3.0mn na ɛwɔ hɔ |
0.2-5.0mn na ɛwɔ hɔ |
|
|
Laser asorɔkye tenten |
1080±10nm na ɛwɔ hɔ |
||
|
Pulse no trɛw |
Ennu anaasɛ ɛne 20ms yɛ pɛ |
Ennu anaasɛ ɛne 60ms yɛ pɛ |
|
|
Pulse frequency a ɛyɛ den |
Ennu anaasɛ ɛne 30Hz yɛ pɛ |
Ennu anaasɛ ɛne 5000Hz yɛ pɛ |
|
|
Cooling nhyehyɛe |
Nsu a ɛma onwini |
||
|
Nhyehyɛe a wɔde hwɛ nneɛma so |
CCD + Microscope(360 digrii a wotumi sesa) |
||
|
Tumi a wɔde ma |
AC220V 50/60 Hz na ɛyɛ adwuma |
||
|
Mfiri no nsusuwii |
1380 × 1000 × 1240mm na ɛwɔ hɔ |
||
|
Articulated abasa ntrɛwmu sorokɔ/Vertical Ntrɛwmu |
1500mm na ɛwɔ hɔ |
||
|
Articulated basa ntrɛwmu tenten / Horizontal Reach |
1600mm na ɛwɔ hɔ |
||
